SILAZANES
HEXAMETHYLDISILAZANE
Technical characteristics:
№ |
Parameter |
Standard |
1 |
Appearance |
Transparent colorless fluid |
2 |
Content of the main substance, not less, % mass. |
95 |
3 |
Mass fraction of impurities, % mass., not more than |
5 |
Application:
- in synthesis of a number of pharmaceutical products (antitumor «ftorofur», anti-sclerotic «parmidin»);
- in synthesis of antibiotics;
- in gas chromatography for deactivation solid carriers and surface treatment of chromatography columns;
- In trimethylsilylation reactions for converting non-volatile or thermally unstable compounds into substances that can be subjected to gas chromatographic analysis.
- as preceramic monomer for production of oxidation-resistant materials on the base of carbonitride, carbide, silicon nitride in the processes of chemical deposition from the gas phase.
POLYORGANOSILAZANE VARNISH KO-961
Technical characteristics:
№ |
Parameters |
Standard |
1 |
Appearance |
Transparent fluid from colorless to light-yellow color. Opalescence is allowed. |
2 |
Mechanical impurity |
None |
3 |
Nonvolatile content, % |
57.0-63.0 |
4 |
Duration of drying of the varnish film at 20±5 оС, h, not more than |
5 |
5 |
The strength of film at bending, mm, not more than |
3.0 |
6 |
Electrical strength of the varnish film, Kv/mm, not less than a) at 20±5оС b) at 150±2оС c) after being in a relative humidity medium 95% at 20±2оС during 24 hours |
85 55 55 |
7 |
Specific volume resistance of varnish film, Om.cm, not less than а) at 20±5оС б) at 150±2оС в) after being in relative humidity medium 95±3оС at 20±2оС during 24 hours |
1.0.1014 1.0.1012 1.0.1012 |
APPLICATION:
It’s used to protect р- n junctions in semiconductor devices.
POLYORGANOSILAZANE RESIN MSN 7-80
Technical characteristics:
№ |
Parameters |
Standard |
1 |
Appearance |
Gum like, viscosity fluid from white to dark-yellow color. White crystalline precipitate is allowed. |
2 |
Mass fraction of non-volatile substances, % |
75-85 |
3 |
Appearance of the film |
Transparent, colorless, shiny without pock and particulate matter |
4 |
Drying time of the film, h, not more than |
5 |
5 |
Film hardness, in relative units, not less than |
0.6 |
6 |
Heat resistance of the film at (200±5)оC, h |
10 |
7 |
The content of nitrogen, % not less than |
20,0 |
APPLICATION:
It is used as heat-resistant modifiers, hardeners of epoxy and organosilicon polymers, as well as moisture-resistant protective coatings for strengthening silicate glass.
HEAT-RESISTANT POLYSILAZANE ADHESIVE KT-30
Technical characteristics:
№ |
Parameters |
Standard |
1 |
Appearance |
Fluid from colorless to brown color |
2 |
Particulate matter |
None |
3 |
Content of non-volatile substances, % mass |
75-85 |
4 |
Conditional viscosity according to VZ-4, s |
20-100 |
5 |
Nitrogen content, % mass, not less |
19.0 |
6 |
Bond strength of the rubber with steel, kg/cm2 , not less than At 200С rubber IRP-1266 or IRP-1401 At 2000С rubber IRP-1266 or IRP-1401 |
12 15 - 4 |
CONTENT:
Adhesive KT-30 (Industrial standard 6-02-760-78) is a solution of polyorganosilazane resin in toluene. The adhesive is one-component and cures at the room temperature for 48 hours. The adhesive joint is corrosion-, fungus-, water- and weather proof, works in the temperature range from -60 to 300оС. When cured the adhesive doesn’t emit volatile substances, retains its properties unchanged under the influence of ozone, coronary discharge, sunlight and radiation.
APPLICATION:
It is used for bonding to vulcanized rubbers based on silicon rubbers and for attaching them to the metals, as adhesive sublayers for adhesives and enamel surfaces, metals with metals, ceramic products, silicate and organic glass, wood, leather and etc.